Our Products
Split Set
Browse the products in our Split Set range below and open each product page for technical data and quotes.
Product range
Split Set
-
Mining
Split Set
The split set is a friction rock bolt consisting of a slotted steel tube and a bearing plate. It is driven into a borehole drilled slightly smaller than the tube diameter, using a percussive rig and a suitable driver tool. As it is driven, the slotted tube compresses and presses against the borehole wall; the resulting friction carries load from the moment of installation, with no grout or resin required. The plate spreads the load over the rock surface and holds mesh in place. Capacity depends directly on borehole diameter, so hole size and in-situ capacity should be checked by pull testing. Widely used in mining and for temporary support; because it is not protected by grout, SN rock bolts or self-drilling anchors are preferred where permanent support is required.
-
Mining
Domed Plate
Domed square steel plate used with split set bolts. The ring at the end of the split set tube presses the plate against the rock surface as the bolt is driven. The plate spreads bolt load over a wider area and holds mesh tight to the surface. The pressed dome stiffens the plate and helps it seat on uneven rock. Made in-house with hole sizes to suit split set diameters.
Safety is not part of the brand, it is the product itself.
Most of the products Fate manufactures are ground support products designed directly for occupational safety. Bolts that prevent tunnel roof collapse, split sets that keep miners safe, guardrails that protect walkways — all are the physical form of safety.
Learn More